Lead Drinking Water Crisis in Flint Michigan KDF

scot-free Lead- Metals- Corrosive Water
Water Quality Association Addresses Drinking Water Crisis in Flint, Michigan

Offers facts and tips about treating for lead contamination

Flying Fish Cove Lisle, Illinois -The Water Quality Association (WQA), an Illinois-based not-for-profit organization, is offering informational resources to help with the drinking water crisis in Flint, Michigan. Flint residents are expected to receive federal aid to help ensure their access to safe drinking water. On January 16, 2016, President Obama signed an Emergency Declaration for the Federal Emergency Management Agency (FEMA) to coordinate all disaster- relief efforts. The declaration states that, “This emergency assistance is to provide water, water filters, water filter cartridges, water test kits, and other necessary related items for a period of no more than 90 days.”

Lead (Pb) has been identified as the waterborne contaminant of primary concern for Flint’s residents. To minimize the presence of contaminants such as lead, which may enter the water after it has left a municipal treatment facility, WQA recommends water treatment equipment that has been certified by an ANSI (American National Standards Institute)-accredited certification body. Such accredited entities include WQA’s Gold Seal Product Certification Program, NSF International and Underwriters Laboratory. Flint residents are encouraged to visit Lead in Water to search for the names of products certified by WQA for lead reduction. Click here to download a technical fact sheet about Lead (Pb).

[amazon_link asins=’B006OA0OWO’ template=’ProductCarousel’ store=’webdespro-20′ marketplace=’US’ link_id=’5e428232-b746-11e7-8e49-413f215b89c7′]

It is important consumers follow the manufacturer’s instructions for maintenance. WQA also lists of water treatment professionals across the U.S. on its website at Lead in Water.
Additional notes
1. Recommend that we concentrate on the following – get kids and adults blood tested.
2. Get first flush testing completed for lead and alternative water source for drinking.
3. Install point of use treatment in the interim.
4. Develop a plan to remove the lead service lines.
5. Develop a plan to install corrosion control.
6. Lawsuits should wait until the problem is addressed.

More on lead in drinking water- Corrosion 

Check out the Keystone Clean Water Team App

Water Treatment Systems – Must Likely need a neutralizing filter and a filter that has KDF 85 or KDF 55 media.

 

More – 2/4/2016

Water Quality Association Addresses Frequently Asked Questions about Lead in Water

Lisle, Illinois -The Water Quality Association (WQA), an Illinois-based not-for-profit organization, is offering informational resources to help differentiate fact from fiction regarding the drinking water crisis in Flint, Michigan. The Association has compiled answers to several of the most common questions, while addressing some widespread misconceptions Flint residents may have about lead (Pb) in drinking water.

What are potential health effects from lead?

Lead poisoning often displays no outward symptoms; however, irritability, weight loss, vomiting, constipation, and stomach pain are possible signs to look for. Young children and pregnant women are at the greatest risk, even from short-term exposure. Reduced cognitive development and neurobehavioral deficits are associated with blood levels less than 10 micrograms of lead per deciliter of blood in children.[1] Therefore, there is no safe level for lead to be present in the blood of children.[2] Individuals will adsorb more lead if they have poor nutrition than those with better diets.

Can a Total Dissolved Solids (TDS) meter be used to detect lead in drinking water?

No. There have been some misconceptions around TDS Meters. These meters cannot measure lead specifically; they detect the conductivity directly related to the concentration of combined total dissolved solids such as minerals, salts and metals. The typical sample of tap water in the U.S. contains approximately 350 parts per million (ppm) of TDS[3], which, as a whole does not on its own indicate a health concern and in many cases is used as a means to enhance taste of water.  Lead concentration is found 1000 times lower at the parts per billion (ppb) level, and is too small to be detected without sophisticated instrumentation. Moreover, because TDS meters don’t measure individual ions, lead cannot be detected on its own.

Where can I go to get my water tested?

Water testing should be done be a certified testing laboratory.[4] WQA strongly recommends water testing be conducted at each point of use in accordance with appropriate sampling procedures. The water should be checked after a period of disuse before a specific water treatment product is selected. Water conditions can change, so the water should be tested both before a treatment product has been installed and at regular intervals following installation. Studies have shown the reported levels of lead found in some Flint, MI water results are higher than conditions under which the manufacturer set the replacement recommendations for filters in published manuals.

How do I maintain a filter once it is installed?

Always follow the manufacturer’s installation instructions and contact the manufacturer to confirm usage and capacity. To ensure the manufacturer can provide the most accurate recommendations, have test results for lead and iron on hand for review.

Where do I find a product certified for lead reduction?

American National Standards Institute (ANSI)-accredited entities offering product certification include: WQA’s Product Certification Program, NSF International, International Association of Plumbing and Mechanical Officials, and Underwriters Laboratory. To find products certified by WQA for lead reduction. Contact information for local professionals and manufacturers of certified products can also be found wqa.org.