Riparian Buffer Zones – A Critical Element to In Stream Water Quality

Article by Pike County Conservation District: mail order Latuda By Rachel Posavetz, Watershed Specialist.

“Riparian buffer is the term for an area of vegetation that grows along a waterway to help prevent substances from reaching the water. The fact that this type of area has its own term should be telling of its importance. As water flows across the land, or the watershed region, it carries with it a whole slew of pollutants: sediment, chemicals, nutrients, bacteria, litter, etc. These pollutants are filtered and absorbed by the plants and soils growing in riparian buffers, and therefore prevented from entering the water.

Riparian buffers provide flood water storage and help to prevent soil erosion during high rain events and along high motion waters such as streams and lake shores. They also provide cooling shade which helps heat-sensitive aquatic organisms survive (such as brook trout), and control algal growth by blocking sunlight.

optically Where do we need riparian buffers? Every stream, lake, wetland, and pond will benefit from these helper plants filtering out harmful substances, holding in the soil, and allowing excess water to infiltrate into the ground water system. These plants are most crucial along the waterway edge, and the greater the riparian buffer width, the better.

What makes a good riparian plant? Almost anything with roots, and preferably native species that are tolerant to wet conditions. Trees and shrubs, grasses and forbs (wildflowers), and sedges and rushes, have strong root systems that lock in the soil and are adapted for surviving in our seasonal weather changes. Trees are the most beneficial because they establish long-term roots, continue to grow over time, and provide the most shade, food and shelter proportional to the space they occupy.  A healthy riparian buffer mimics the natural the habitat for the area in which it is located, whether it be a forest or a meadow, with a diversity of plant types and heights. Sod, or mowed grass, has leaves too short to aid in filtering, and roots too shallow to aid in erosion protection.

Reference: Riparian Forest Buffers Linking Land and Water

What else do they do? Riparian buffers add to the available habitat and food sources for wildlife such as birds, pollinators, mammals, and other critters, including aquatic ones. Did you know “trees feed trout”? The aquatic insects at the bottom of the food chain, like caddisflies, munch on the tree leaves and their biofilm (algae and bacteria) that have fallen into the streams. Trunks and branches that fall into the stream create aquatic habitat variety as well.

Who can make a riparian buffer? You can! If your property borders a waterway, you can enjoy designing a grow zone that suits your liking. Though it will require some maintenance until the new plants establish, you can enjoy the beauty of the flowers right away.  Check the links below to learn more.

Lastly, riparian buffers can serve as a reminder to us that water levels fluctuate within the floodplain, and we should keep development a safe distance from the water’s edge.”  (Article link)

Our thoughts on riparian buffer zones:

1. Overall we agree, we should protect and restrict encroachment on stream channel, floodway, floodplain, wetland, and hydric soil boundary.

2. This should not be a one-size fits all “safe distance”, but based on site-specific information and conditions.

3. Most beneficial chemical reactions happen at this critical transition zone – if you want to protect streams from nitrogen impact from nitrate – maintain the anoxic zone and transition zones between uplands and streams.

4. Featured Training Course: Stream Restoration – Corridor Processes

Take the first step to get back to zero :  Harvest the Rain, How to Enrich Your Life by seeing Every Storm as a Resource

Testimony House Committee on Environmental Resources and Energy January 29, 2014 House Bill 1565 Stream Buffers

House Committee on Environmental Resources and Energy Hearing January 29, 2014 – Testimony by Mr. Brian Oram Geologist, Soil Scientist, Educator, and Citizen of Pennsylvania

 

My name is Brian Oram and I wanted to thank you for this opportunity. I am a licensed professional geologist, soil scientist, and owner of B.F. Environmental Consultants, Inc.  I am lifelong resident of Northeastern Pennsylvania and currently reside in Dallas, Luzerne County. I am here today as a citizen and licensed professional in Pennsylvania in support of House Bill 1565.

The proposed house bill makes a slight change to the Clean Streams Law which would eliminate the requirement to use or install an arbitrary 100 foot riparian buffer on all streams and 150 foot a riparian buffer zone for EV and HQ streams.  The proposed wording change for HB 1565 is as follows:

“(c)  The use or installation of riparian buffers and riparian forest buffers shall not be required under this section.  Riparian buffers and riparian forest buffers may be used as a choice among best management practices, design standards and alternatives to minimize the potential for accelerated erosion and sedimentation and to protect, maintain, reclaim and restore water quality and for existing and designated uses.”

The reasons that I support this proposed change:

1. This proposed change in the law will not result in the destruction of riparian zones or significant encroachment or disrupt of these zones because existing environmental permitting processes are already in place to protect these areas.  The change in the law will permit the development of a site that permits the design professionals to evaluate all alternatives and select the approach that limits disturbance and manages the potential impacts.

Riparian zones can be divided into three broad zones:

a. Active Zone is the area within the banks of the stream and the channel bottom;
b. Zone 1 is typically associated with the floodway and floodplains; and
c. Zone 2 is typically associated with wetland areas, organic soils, and other transition zones.

Under the current laws in PA, the floodway, floodplains, and delineated wetland areas are protected from direct development and encroachment.  With respect to floodways and wetland areas, there are existing permit processes in place to address issues related to encroachment into these zones. 

2. The proposed legislative change allows for use of riparian buffers as a site-specific BMP as a function of the stream classification.  This approach is consistent with the criteria for HQ and EV streams as already outline in Chapter 93. (Currently, the Chapter 102 regulation is a standard not based on science or a site-specific analysis, but a universally applied arbitrary mandate).

The proposed legislation permits the establishment of riparian buffers zones or maintaining specific riparian buffers that are based on a site-based criteria/analysis.  This analysis includes the nature of the proposed development, proposed management system, current conditions, stream classification, and the water quality criteria/biological criteria provide in the law.  The proposed change will ensure that riparian buffers are sized and utilized in a manner that is consistent with the provisions of the Clean Streams Law.

3. The proposed change will prevent negative impacts to current or future stream quality.

In most cases, the concept around forest riparian zones is based on the principle that the zone is actively used to manage uncontrolled flow or to control nutrients and sediment.  When projects use engineering controls,  such as: bioretention devices, rain gardens, wet detention ponds, water reuse, land-based irrigation systems, groundwater recharge, and peak flow retention, treatment is provided by a combination of engineering controls and non-engineering controls that occur and are managed outside of the stream side “riparian zone” and/or wetland areas.

4. Many of the recommendations related to the size of a riparian buffer assume the buffer is the main active control system for post- construction stormwater management and includes provisions that will protect wildlife habitat.

For engineered projects, riparian buffers should not and are not the main system that is used to control sediment, water flow, volume reduction, or even nutrient control.  These riparian buffer’s primary role is to further polish that water after it already meets design criteria.  However, DEP’s current guidance suggests transporting managed water through the buffer in a pipe or swale directly to the receiving waterbody, which is inconsistent with the true role of the riparian buffer zone.

Criteria for riparian buffers- Buffers and set-backs for a stormwater management system should be based solely on maintaining in stream quality, downgradient use provisions, and biological criteria that are part of Chapter 93. Riparian buffers should not be established in stormwater management regulations to protect the general wildlife habitat for the watershed.  Chapter 93 provides wildlife protection to High Quality Waters if the water is a Class A Wild Trout Stream or where the Rapid Bioassessment Protocols for Use in Streams and Rivers: Benthic Macroinvertebrates and Fish resulted in a score of 83 % compared to a reference site. (Chapter 93)

RIPARIAN BUFFERS: WHAT ARE THEY and HOW DO THEY WORK? (http://www.soil.ncsu.edu/publications/BMPs/table.html

“Most decisions about buffer widths will be a compromise between ideal widths based on environmental goals (wildlife corridors, bank stabilization, and water quality protection) and sociologic or economic constraints. Science-based criteria, for which research data may be available to support an informed decision, include the functional value of the water resource; watershed, site, and buffer characteristics; adjacent land use; and buffer function. The functional value of the water resource is important for determining buffer width in that a highly valued resource may merit a wider buffer for increased protection.”

5. A project can use a riparian buffer zone as an additional management tool, but the minimum buffer should be based on site-specific analysis.  This analysis should be site and project specific and be done by licensed professionals and not an arbitrary non-scientific approach.

In the long-run, an arbitrary buffer zone will result in inadequate protection in areas with larger streams were a project proposes using little or no engineering control systems.  The minimum size of a riparian buffer zone should be site-specific and a function of the proposed project and proposed engineering and non-engineering controls.  The regulations, with this proposed change, will be more effective if they are less restrictive and permit the licensed professional in the state of Pennsylvania to make decisions based on the site-specific conditions, proposed nature of the development, and long-term management for the site.

 RIPARIAN BUFFERS: WHAT ARE THEY and HOW DO THEY WORK? (http://www.soil.ncsu.edu/publications/BMPs/table.html

“The current proposed buffer standards in North Carolina use a two-tiered riparian buffer: forested areas near the streams and grassed areas away from the stream. The proposed buffer width is 50 feet: 30 feet of forest and 20 feet of grass (NCDEHNR, 1997). Some streams, however, may need greater and some streams need less buffer width, depending not only on site location but also on the pollutant that is being controlled. For optimal performance, riparian forest buffer systems must be designed and maintained to maximize sheet flow and infiltration and impede concentrated flow”.

6. In Pennsylvania, we have enough examples of well-meaning guidance documents not specifically based on science and designed and package primarily in response to lawsuits. These guidance documents have caused the development of policy in PA that are ineffective, make the goals effectively unachievable, potentially creates future problems, and creates significant other unintended consequences.

Recent examples would be the legislation that developed after the PA Guidance Document on Stormwater Management and the recent attempts to regulate nitrates from individual on-lot septic systems.

We do recommend some proposed wording changes to the proposed House Bill:

With respect to the proposed House Bill, we would suggest a slight wording change to clarify the scope and intent.
We recommend the phrase “and/or” should be included in the proposed language to account for the difference in the level and type of protection afforded to EV streams and HQ streams.  The level of protection afforded by the current law is not the same for EV and HQ streams.

and

We would recommend that the size of the buffer be based on a site-specific evaluation that takes into consideration the existing conditions, proposed use,  proposed engineering/non-engineering controls, and the proposed long-term management that are proposed by the project.

In conclusion, it is my personal and professional opinion that the change in the regulations would put the sizing and the development of stormwater management systems in the hands of professionals that have been licensed by the State of Pennsylvania and other professionals that provide facts and science-based information to make site-specific and project specific recommendations to meet the goals and objectives of Chapter 102 and to meet the water quality standards in Chapter 93.   We should not have a one-size-fits-all approach to stormwater management in Pennsylvania.
Prepared by:
Mr. Brian Oram, PG
B.F. Environmental Consultants Inc.
15 Hillcrest Drive
Dallas, PA 18612
http://www.bfenvironmental.com

http://www.water-research.net
bfenviro@ptd.net

Summary

Proposed Change DOES NOT
1. Eliminate or permit the disturbance of riparian buffers.
2. Does not waive any provisions of the law and makes using a Management Riparian Zone an Option with the size of the riparian zone based on science- therefore, it may be larger or smaller than 150 feet.
3. Provides for flexibility without reducing protection.
4. Does not create new waivers that could be challenge in the courts.