PADEP pipeline task force gives 184 recommendations
Note Our Work – Email blast from PIOGA
A state task force on natural gas pipelines is making 184 recommendations touching on everything from location of pipelines to emergency response plans, all designed to promote “responsible” pipeline development in Pennsylvania. The 335-page document, crafted by the state Department of Environmental Protection’s Pipeline Infrastructure Task Force, has been posted online for public review.
“It is important to remember that the report is not meant to be the final word,” said DEP Secretary John Quigley, who chaired the task force. “When we present our report to the governor in February 2016, I anticipate that the next step will be to determine the feasibility and implementation strategies for each recommendation.”
The 48-member task force was created in May by Governor Tom Wolf to develop policies, guidelines and tools to assist in pipeline development, operation and maintenance.
Recommendations in the draft were assembled by delegates from sectors affected by pipeline development, Quigley noted, including agriculture, communities, environmentalists, cultural resource advocates, industry officials, government agencies and emergency responders.
That lengthy list of recommendations starts with “educate landowners on pipeline development issues.” Other recommendations:
- Implement full-time environmental inspections during pipeline construction.
- Monitor water quality during construction.
- Establish planning coordination between county agencies and pipeline developers.
- Require pipeline abandonment plans.
- Standardize emergency response plans and provide 911 addresses for pipeline-related facilities.
- Do not locate pipelines parallel to waterways within their 100-year floodways.
- Conduct early outreach with affected communities.
- Minimize impact on local roads.
- Create various statewide bodies and processes, including an all-region DEP pipeline review committee, a statewide pipeline information center for the public, and a DEP design manual for pipeline construction.
A 30-day public comment period on the draft report will run through December 14. [Read more]
Please note – there is no assumed responsibility associated with Pipeline Construction for Private Well Impacts – therefore it is important to document baseline conditions for your existing water sources and water wells. Primary items of concern are aesthetic water quality issues, future methane and other gas releases, spills, local disturbances, discolored water, and related contaminants. The Know Your H20? App for Baseline Testing in PA should help.
New Tools and Courses
Know Your H20 Phone App and Database Search
Citizen Scientists – The Online Water Quality Index Calculator is Available.
Training Courses on Natural Gas Development and Environmental Concerns
Stream Restoration, Wetlands, and Water Resources Management
Actions:
- If you have any testing done as part of this action, please consider releasing this data to the Citizen Groundwater and Surface Water Database. Fill out the attached form and mail the data to the following address:
Mr. Brian Oram, PG
Keystone Clean Water Team
15 Hillcrest Drive
Dallas, PA 18612
Please note- if you have baseline testing done already you may have some information on the level of surfactants in the water if you had a MBAS test done. - Informational Screening Testing – Get your water screened for water contamination including isopropanol – Informational Screening Water Kit (Not Certified) Covers about 200 parameters, plus a review of any predrilling data – Only $ 275.00. Email
- Drinking Water Guide for Pennsylvania.
JKLM ENERGY, LLC Surfactant Release Potter County Chemical Spill
Initial Press Release (Partial) – Chemical Spill – Potter County, PA (Please like and share with others)
“JKLM ENERGY, LLC INITIATES RESPONSE TO RELEASE OF SURFACTANT AT REESE HOLLOW DRILLING LOCATION IN SWEDEN TOWNSHIP, POTTER COUNTY WEXFORD, Pa (Sept.24) – JKLM Energy, LLC (JKLM) today released information on the company’s ongoing efforts to respond to an incident in which a surfactant solution used in the drilling and completion of natural gas wells is believed to have migrated into shallow subsurface and ground water during initial drilling activities at the Reese Hollow 118 Pad located off Burrows Road in Sweden Township, Potter County, Pa. Surfactants are also referred to as “foaming agents” or “soap.” The migration was discovered following the use of the surfactant to free a broken drill bit piece in the well at 570 feet below ground on September 18th.“
“Local residents with questions may contact Dean Boorum, JKLM’s community liaison, at (814) 598-3960. The company is also establishing a website (www.northhollowresponse.com) to provide regular updates as the groundwater investigation and response process continues.”
Link to Information Portal
Link to Press Release –
“JKLM ENERGY, LLC TO PROVIDE DAILY UPDATES TO COMMUNITY ON PROJECT WEBSITE No Isopropanol Present in Five of Six Initial Well Water Samples Closest to Drilling Location WEXFORD, Pa (Sept.25) – JKLM Energy, LLC today announced plans to issue daily updates to the public regarding the release of drilling chemicals at its Sweden Township, Potter County wellpad. These updates, along with previous press releases and related information will be available at www.northhollowresponse.com, beginning at 4:00 PM today. As of September 24, 2015 JKLM Energy, LLC received lab results from six water sources that had potential groundwater contamination. These results included four of the five private water wells with foamy characteristics for the presence of isopropanol, the chemical of principal concern in the incident, which was not detected in those four wells. The material was also not detected in a sample collected from a spring located in the area of the investigation. The private well with foam closest to the drill site contained 15 ppm (parts per million) isopropanol, which is at the Act 2 standard for aquifers serving residential uses, the threshold for state drinking water standards. These sampling results are consistent with the belief that the aquifer would continue to disperse and degrade the isopropanol as it is transported through the aquifer by means of normal water flow.”
Local Bradford County News Report
Another News Report
Another Report
JKLM ENERGY PROJECT UPDATE, OCTOBER 1
Total number of water samples (water wells, springs and surface water sources) analyzed to date (93), and those found with the presence of methylene blue activated substances (MBAS), isopropanol (IPA) and acetone, a constituent that is expected to be found as isopropanol breaks down in the environment. In a correction from yesterday’s update, a total of five samples have been returned with levels of MBAS above the U.S. Environmental Protection Agency’s non-health secondary standard of 0.5 parts per million (ppm). 5 samples above MBAS standard and 1 above isopropanol standard.
Learn More about Foaming Agents in Well Water
Video –Potter County’s water sources contaminated (9/25/2015) – Must Watch – Solid Information. (53 gallons of chemical used – final concentration or 0.25 % or 2500 mg/L after initial dilution). (Clarity requested- did it say it moved 8000 feet in 1 day?)
dep-notice-of-violation-jklm-energy (9/30/2015)
Our Comments
Testing Should include general water quality, MBAS, isopropanol, and acetone. When isopropanol breaks down in the environment, this is a possible daughter. This would suggest running a full VOC can with TICs to pick up daughters. Therefore, the equivalent of a Tier II may be advisable. The breakdown of isopropanol to acetone was based on feedback and expert information from B.F. Environmental Consultants and Quantum Laboratories.
Drinking Water Standard for foaming agents or MBAS – methyl blue activated substances or surfactants is 0.5 mg/L – potential aesthetic problems.
“Methylene blue active substances (MBAS) are anionic surfactants that can be detected by colorometric or color reaction methods. An MBAS assay is a type of analysis that makes use of a substance called methylene blue in order to detect the existence of foaming agents, detergents as well as other anionic substances in water under testing. With the MBAS assay method, undesirable components in water samples can be detected appropriately. This prevents water corrosion or contamination.”
Acetone – Drinking Water Standard – No formal Standard, but there is a clean up standard of 33 mg/L, but New Jersey has a standard of 6 mg/L. (Also Acetone can be naturally occurring). If evaluating acetone, it would be advisable to collect preserved and unpreserved samples and analyze samples as soon as possible. In some cases, the preservation method may create some acetone.
MSDS Sheet – sec-PROPYL ALCOHOL, ISOPROPANOL, PROPAN-2-OL, IPA – ISOPROPYL ALCOHOL
Another MSDS Sheet (another source)
More MSDS Sheets – F-485 and Rock Drill Oil 150 (We could not determine the specific one so we are using the “Gulf” as an example)
National Drinking Water Database – Forming Agents
Recommended Baseline Testing – Get The App (FREE)
Informational Course On Fracking and other Energy Courses – The Process
Actions:
- If you have any testing done as part of this action, please consider releasing this data to the Citizen Groundwater and Surface Water Database. Fill out the attached form and mail the data to the following address:
Mr. Brian Oram, PG
Keystone Clean Water Team
15 Hillcrest Drive
Dallas, PA 18612
Please note- if you have baseline testing done already you may have some information on the level of surfactants in the water if you had a MBAS test done. - Informational Screening Testing – Get your water screened for water contamination including isopropanol – Informational Screening Water Kit (Not Certified) Covers about 200 parameters, plus a review of any predrilling data – Only $ 275.00. Email
- Drinking Water Guide for Pennsylvania.