3M Agrees to EPA Order to Sample and Provide Treatment for PFAS Contamination in Drinking Water near Cordova, IL Facility
EPA Enforcement Part of Agency Strategy to Characterize and Address PFAS Releases from Major Manufacturers
WASHINGTON (November 3, 2022) – Today, the 3M Company agreed to a U.S. Environmental Protection Agency (EPA) order to sample and provide treatment to address contamination from per- and polyfluoroakyl substances (PFAS) found in drinking water in the vicinity of 3M’s Cordova, IL facility. Recent sampling results provided by 3M indicate the widespread presence of a mixture of at least 19 different PFAS chemicals in drinking water within a 3-mile radius of the Cordova facility. Given the unique circumstances affecting this community, including more than five decades of PFAS discharges and the many types of PFAS chemicals found, EPA has concluded that the situation constitutes an imminent and substantial endangerment under the federal Safe Drinking Water Act.
“I have directed EPA staff to use every enforcement tool at our disposal to require manufacturers of PFAS to address potential endangerment to the public and to compel them to characterize, control, and clean up ongoing and past PFAS contamination,” said EPA Administrator Michael S. Regan. “Communities have suffered far too long from exposure to these chemicals. This settlement is a critical step forward in our work to protect communities from pollution and hold polluters accountable for their actions.”
As part of this settlement, 3M is required to offer treatment to all private well owners within 3 miles of the facility and to the Camanche Water Supply in Iowa, in an effort to remove PFAS from the drinking water. 3M is also required to offer drinking water sampling out to 4 miles from the facility for private well owners and out to 10 miles from the facility for public water systems as well as to the Quad Cities’ public water systems, using EPA protocols and conducted under EPA oversight.
3M’s sampling of the drinking water in private wells near the facility detected a range of concentrations including: perfluorooctanoic acid (PFOA) of non-detect to 25 ppt, perfluorooctanesulfonic acid (PFOS) of non-detect to 30 ppt, hexafluoropropylene oxide dimer acid (HFPO-DA), or “GenX” of non-detect to 59 ppt, and perfluorobutane sulfunate (PFBS) of non-detect to 51 ppt. 3M did not use EPA test methods for this sampling. As a result, the order issued today requires 3M to sample these wells again following EPA test methods.
3M was one of the original companies developing and producing PFAS within the United States, and their Cordova facility operations and discharges containing PFAS chemicals date back to the 1970s. 3M’s agreement to the terms of the Order including completing the work required under EPA’s oversight is an important step to begin addressing the problem created by decades of contamination. This settlement is part of EPA’s ongoing efforts to compel major PFAS manufacturers to characterize and control ongoing releases from their facilities.
Background
Last year, EPA launched the PFAS Strategic Roadmap, a whole-of-agency approach for addressing PFAS. The Roadmap sets timelines by which EPA plans to take specific actions and commit to new policies to safeguard public health, protect the environment, and hold polluters accountable. In the national PFAS Roadmap, EPA commits to investigate releases of PFAS and where needed require manufacturers to characterize and control their PFAS releases. In the Roadmap, EPA also commits to take swift action to address potential endangerments to public health. EPA is actively working with its state partners on this effort, which will build upon valuable work led by a number of states.
Per- and polyfluoroalkyl substances, collectively called “PFAS,” are a group of man-made chemicals that have been manufactured and used in industry and consumer products since the 1940s. There are thousands of different PFAS chemicals, some of which have been more widely used and studied than others.
WASHINGTON – Today, the U.S. Environmental Protection Agency (EPA) published the Final Fifth Drinking Water Contaminant Candidate List (CCL 5), which will serve as the basis for EPA’s regulatory considerations over the next five-year cycle under the Safe Drinking Water Act. This update includes a substantial expansion of per- and polyfluoroalkyl substances (PFAS), an important first step towards identifying additional PFAS that may require regulation under the Safe Drinking Water Act.
“Following public engagement and robust scientific review, the final contaminant candidate list is the latest milestone in our regulatory efforts to ensure safe, clean drinking water for all communities,” said EPA Assistant Administrator for Water Radhika Fox. “As EPA takes action to protect public health and the environment from PFAS, including proposing the first nationwide drinking water standards later this year, today’s final CCL 5 looks further forward to consider additional protective steps for these forever chemicals.”
A year ago, EPA published the PFAS Strategic Roadmap, outlining an Agency-wide approach to addressing PFAS in the environment. Today’s announcement strengthens EPA’s commitment to protect public health from impacts of PFAS and support the Agency’s decision-making for potential future regulations of PFAS.
In addition to a group of PFAS, the Final CCL 5 includes 66 individually listed chemicals, two additional chemical groups (cyanotoxins and disinfection byproducts (DBPs)), and 12 microbes.
In developing the Final CCL 5, EPA requested public nominations, providing an opportunity for people to make recommendations to the Agency about specific contaminants of concern that may disproportionally affect their local community. EPA further enhanced the CCL process based on comments received on this CCL and previous CCLs, including by prioritizing data most relevant to drinking water exposure, improving considerations of sensitive populations including children, and considering the recommendations included in the Review of the EPA’s Draft Fifth Contaminant Candidate List (CCL 5) report from the Science Advisory Board. These improvements resulted in a Final CCL 5 that can better inform prioritization of contaminants for potential regulatory actions and/or research efforts.
