Posted by admin on March 4, 2021 · Leave a Comment
PFAS Contamination and Cost Recovery
By NRWA Cheyenne
On March 4th, 2021
“This report contains important information on PFAS contamination and a cost recovery program for testing, treatment and remediation initiated by the National Rural Water Association on behalf of rural water and wastewater utilities across America.
Per- and polyfluoroalkyl substances (PFAS) are a group of man-made chemicals that includes PFOA, PFOS, GenX, and many other chemicals. PFAS have been manufactured and used in a variety of industries around the globe, including in the United States since the 1940s. PFOA and PFOS have been the most extensively produced and studied of these chemicals. Both chemicals are very persistent in the environment and in the human body – meaning they do not break down and they can accumulate over time. There is evidence that exposure to PFAS can lead to adverse human health effects like kidney damage, cancer, developmental effects to fetuses, and other illnesses.
In 2016, the Environmental Protection Agency lowered the health advisory level from 400 parts per trillion to 70 parts per trillion. Since that change was made, states have taken independent actions ranging from the adoption of the recommended health advisory level of 70 ppt to a much lower allowable level. As a result, systems of all sizes are experiencing increased cost for testing treatment and remediation. At the same time, the EPA has made PFAS contamination a priority and action has been taken to label PFAS as a hazardous substance. This will impact wastewater utilities and the disposal of bio-solids into a hazardous landfill if PFAS is detected.
In 2019, the National Rural Water Association recognized the financial burden on systems and joined the law office of Napoli Shkolnik PLLC to bring these systems together that have concerns or have been affected by PFAS contamination. This potential landmark contamination case could help water and wastewater systems recoup money spent on treatment and remediation. The sole purpose is to allow utilities the opportunity to recover their cost associated with testing, treatment and remediation with no upfront cost to the utility.
It is recommended that utilities register for cost recovery if they have tested and detected PFAS at any level or if the water source is near a potential PFAS contamination site. These sites include, but are not limited to, airports, military bases, fire training activity areas, landfills and/or manufacturing facilities. There are three key points to this action:
- The action is for cost recovery as opposed to punitive and is filed against the global manufacturers of the compounds, not any local companies who may have used them.
- There are no upfront costs to the utility to register for cost recovery.
- Once a settlement is reached, the utility has the option of accepting the settlement or declining.
Utilities can find more information about PFAS contamination here and register for cost recovery here.”
Note:
1. This is one reason the EPA should not set a formal standard.
2. The second reason – once it is removed from the water – where will it go and who will be responsible for this stuff??
3. Why we suggest ordering a Neighboorhood Hazard Reports
Informational PFAS Water Testing Program (PFAS PFOS Drinking Water Testing Forever Chemicals – PFOA, PFOS, Gen X Compounds in Drinking Water).
Get Treatment
EPA officials recommend NSF and ANSI Certified filters to reduce PFOA and PFOS. ” P473: Drinking Water Treatment Units – PFOA and PFOS — to verify a water treatment device’s ability to reduce perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) to below the health advisory levels set by the U.S. Environmental Protection Agency (EPA).”
Treatment Options: (Point of Use Filters meets P473 and other standards)
Aquasana OptimH2O Reverse Osmosis Under Sink Water Filter System
AO Smith 2-Stage Under Sink Clean Water Faucet Filter – NSF Certified Carbon Block Drinking Water Filtration System
Filed under Environmental Health, foaming agents, NSF P473, P473: Drinking Water Treatment Units – PFOA and PFOS, PFAS, pfos, POE, reverse osmosis · Tagged with forever chemicals, GenX, NSF P473, Per- and polyfluoroalkyl substances, PFAS contamination, PFOA, PFOS, Point of Use Filters meets P473
Posted by Brian on February 14, 2019 · 1 Comment
Andrew Wheeler, U.S. Environmental Protection Agency’s acting administrator, unveiled the Agency’s PFAS (per- and polyfluoroalkyl substances) action plan to address growing concerns around tainted drinking water and groundwater nationwide during a news conference on February 14 in Philadelphia, Pennsylvania.
In his address, Wheeler indicated the EPA will propose a regulatory determination, which is the next step in the Safe Drinking Water Act process, for establishing a federal maximum contaminant limit (MCL) for PFOA (perfluorooctanoic acid) and PFOS (perfluorooctanesulfonic acid) by the end of 2019. Wheeler also said the Agency would continue its enforcement actions, clarify remediation strategies, expand monitoring of PFAS in the environment, and enhance the research and science for addressing the contaminants by developing new analytical methods and tools. The EPA’s current health advisory level for PFAS is 70 parts per trillion.
The National Ground Water Association applauds the EPA’s decision to move forward with the MCL process for PFOA and PFOS and urges the Agency to rely on sound science to make the determination as promptly as is feasible. Moving towards establishing an MCL will provide the national certainty required to ensure effective clean-up at sites around the country.
“PFAS contamination is a national crisis that requires national leadership, and the EPA’s announcement is an important step in providing that leadership,” said Lauren Schapker, government affairs director at NGWA. “As the EPA begins implementation of the PFAS management plan, NGWA will continue to work with the Agency to address the unique challenges facing rural areas and private well owners, and to ensure the technical and financial resources are made available to address the crisis.”
…..
PFAS / PFOS Drinking Water Testing of YOUR Water !
PFAS has been on NGWA’s radar for several years and will remain a priority issue for the foreseeable future. The Association has created a Groundwater and PFAS resource center for NGWA members. The center includes PFAS FAQs, top 10 facts about PFAS, and a homeowner checklist, among other items. NGWA is also the publisher of the guidance document, Groundwater and PFAS: State of Knowledge and Practice.
As in 2018, NGWA is hosting educational events on PFAS this year as well:
- PFAS in Groundwater Workshop: The Professional’s Challenge, June 18 in Westerville, Ohio
- The PFAS Management, Mitigation, and Remediation Conference, June 19-20 in Westerville, Ohio
- PFAS in Groundwater Workshop: The Professional’s Challenge, December 5 in Las Vegas, Nevada.
Full Article
We are recommending the installation of a final barrier filter on your drinking water and you should learn more about the consumer products that contain PFOA and PFOS, because it is not just your drinking water.
Filed under Children's Health, city water testing, Clean Water Act, Community Health, Environmental Hazards, Environmental Health, Groundwater, Health, PFAS, pfos, POE, Sludge, Sourcewater Protection, Water, Water Testing, Well water testing · Tagged with groundwater pfas, NSF 401, NSF 42, NSF 53, NSF 58, NSF P473, perfluorooctanesulfonic acid, Perfluorooctanoic acid, PFOA, PFOS
Posted by Brian on February 14, 2019 · Leave a Comment
EPA suggests consumers have water tested and use certified in-home filtration to remove or reduce levels of these toxic chemicals
LISLE, Ill. – The Water Quality Association supports the U.S. Environmental Protection Agency (EPA) taking steps toward setting a safety threshold for highly toxic drinking water contaminants known as PFAS. Acting EPA Administrator Andrew Wheeler on Thursday outlined a plan that addresses drinking water and cleanup concerns as well as monitoring of PFAS, expanding research and improving enforcement.
“We are encouraged that the EPA is continuing to move forward with establishing a consistent standard across the country for these dangerous chemicals,” said WQA Global Government Affairs Director David Loveday. “We strongly support the action plan’s recommendations that consumers have their drinking water checked by a certified laboratory and then use certified in-home filtration to remove or reduce any chemicals found.”
In September, a letter from WQA supporting further study of human health risks of PFAS contamination and using in-home treatment technologies to combat them was introduced into testimony before a U.S. House Energy and Commerce subcommittee. Research shows POU/POE treatment “can be used to successfully treat for these contaminants at the home or in a building,” said the letter from WQA Executive Director Pauli Undesser. “They cost only a fraction of the price our society would need to bear to upgrade our drinking water treatment plants for PFAS removal.”
Last May, Loveday and WQA Technical Affairs Director Eric Yeggy took part in the EPA’s PFAS National Leadership Summit, which called for a national management plan.
Per- and polyfluoroalkyl substances, known collectively as PFAS, are man-made chemicals found in such things as firefighting foams and stain-resistant, waterproof and nonstick coatings. Because they break down slowly, if at all, they have turned up in drinking water systems across the nation in varying levels. Some individual states have begun regulating the chemicals.
For individuals concerned about PFAS, the EPA Plan states:
“The EPA recommends contacting your state for a list of laboratories that are certified to test for PFAS using EPA Method 537. If you find PFAS in your drinking water, certain PFAS can be reduced or removed through the use of in-home point-of-use or point-of-entry water filters. It is important to keep in mind that any in-home treatment device should be certified by an independent party.”
In-home technologies such as reverse osmosis, carbon filtration and anion exchange have been independently tested and proven to be a successful final barrier to treat drinking water for PFAS.
WQA is a non-for-profit, accredited independent third-party certification body by the American National Standards Institute (ANSI) and the Standards Council of Canada. WQA’s website provides additional information on PFAS chemicals and product certification.
As part of its annual DC Fly-In and the Water Resources Congressional Summit on March 5 and 6, WQA members and staff will discuss PFAS in meetings with Congressional and federal agency staffs. Fly-In registration is open through Friday, Feb. 15.
WQA is a not-for-profit trade association representing the residential, commercial, and industrial water treatment industry. WQA’s education and professional certification programs have been providing industry-standardized training and credentialing since 1977. The WQA Gold Seal certification program has been certifying products that contribute to the safe consumption of water since 1959. The WQA Gold Seal program is accredited by the American National Standards Institute (ANSI) and the Standards Council of Canada (SCC).
pfas_fact_sheet_history_and_use__11_13_17
Water Testing Links
PFAS and GenX Water Testing
Microplastics in Water
Filed under city water testing, Clean Water Act, Community Health, consumer products, Contaminated water, Environmental Hazards, foaming agents, PFAS, plastics, POE, Water Testing, Well water testing · Tagged with drinking water, EPA Method 537, er- and polyfluoroalkyl substances, firegighting foams, in-home filtration, nonsitck coatings, PFAS, pFAS in commerical products, stain-resistant, water quality association, WQA
