Drinking Water Testing Kits Corrosion Lead Copper Metals – My Drinking Water is it Safe?

Article for: private well owner, spring user, city water customer, regulated water supply, water utility customer, homeowner, landlord, tenant, drinking water

The Flint water crisis reportedly started in 2014 and ended in 2019, but in reality the “crisis” started prior to 2014 and probably has not ended.   Why?  The problem with corrosion within the water system and individual’s homes clearly started prior to 2014 and the customers and users within the system were not aware of the short-comings in their drinking water quality, the need for corrosion control, need to replace service laterals, plumbing within their homes, the need to be proactive in protecting your personal and families’ health, lack of public outreach and education, and not knowing the wrong signs of a corrosion problem   The main purpose of this article is to help identify the warning signs of a potential corrosion problem with your drinking water.    The signs of a corrosion problem come in many forms, but it is important for the user to take responsibility for keeping their eyes open.   Corrosion of our drinking water supplies is a very common water quality and public health issue that is related to not only the raw water quality, level of pretreatment, status of the community distribution system, the internal plumbing for a building, the usage and management of water within the building, and the fixtures used within the system.  This sounds overwhelming, but there are clear warning signs you may have a problems.

The most common signs of a problem with corrosion included the following:

1. Blue-green or greenish water or even reddish brown or brown water that may be intermittent and worse in the hot water than the cold water.
2. Staining of porcelain fixtures, such as sinks, drains, or tubs that appear green, blue-green, and reddish brown.
3. Coatings on aeration devices that appears greenish-gray or bluish green and particles on the screen of the aerator that appear green, bluish-green, greenish-gray, reddish-brown, yellow-brown, or even bluish-gray.
4. Discoloration of water piping near solder joints and/or pin-hole leaks in piping and the premature failure of water appliances and water heaters.
5. Old piping in a home that may include lead pipes or piping that was installed using high lead solder, such as lead service lines and galvanized piping.
6. The first flush of the water from the tap may have a bitter taste.

What is the age of your home, when was the house last remodeled, and the piping in your home?

YOUR household plumbing may be the cause for lead in your drinking water. In older homes, lead was used to make the piping and/or solder.  In homes, built prior to 1930’s water pipes were primarily made from lead. These pipes can be identified because the piping tends to have a dull gray color, can be scratched with a key, and a magnet will not stick to the piping. In buildings built between the 1930’s and early 1980’s, copper pipes were often used, but the solder contained elevated levels of lead. The primary source of the lead includes the use of lead pipes, lead lined tanks, and use of 50/50 lead/tin solder. Because of the concern with lead, the EPA banned the use of high lead solders in 1986.

In the 1950’s and 1960’s galvanized water lines was utilized in new home construction. Currently, this type of piping is not widely used, but it is more commonly used with well water applications.  This piping is steel piping that has a zinc coating to reduce the tendency for the piping to corrode.  When this pipe corrodes, the pipe rust from the inside of the pipe and then works outward.  When this occurs, the water may produce intermittent discolored water that tends to be brown, yellow, or reddish brown, and the piping will likely clog with rust and most likely collapse over time. This does not mean that a newer home is safe from lead contamination; in fact, the available data suggests that buildings less than 5 years old can have high levels of lead.

In fact, buildings built prior to 1986 likely contain some lead plumbing.  Prior to 2014, the legal definition for “lead free” was plumbing fixtures with a lead content of less than 8 %.  In 2014, the term was redefined to include only fixtures with a lead content of 0.25% and newly installed fixtures must use the “lead free” materials, but this did not apply to fixtures currently in use.

What You Can Do to Protect Yourself and Your Family?

After getting this information, you should do the following:

1. Inspect your plumbing system for signs or evidence of a corrosion problem and low cost lead screening testing  (water) or (paint,dust, soil).
2. Take note of the visual and aesthetic signs of a corrosive water problem.
3. Try our Free Drinking Water Diagnostic Tool.
4. Order the Drinking Water Guide.
5. Get Your Drinking Water Tested and the Results Reviewed by a Professional. At a minimum, we recommend the “Corrosion Check” Water Test Kit.
6. Act to improve your drinking water quality by reporting problems to your local water authority for public water supplies or if your water comes from a private water source take the necessary action to reduce the risk to the health of yourself and your family and to reduce the potential costs associated with the premature failure and/or invalidating the warranty of water related appliances, water leaks and associated damage, and/or the additional operational costs associated with inefficiencies associated with clogged or corroded piping/equipment.
7. Update fixtures and piping and consider the use of point-of-use filters or a whole-house water treatment system. Before installing a water treatment system, please get a comprehensive water quality test (City Water) or (Well Water).

Our Motto is ” Learn / Diagnose / Test “

Learn – learn about your source and system.

Diagnose – determine the warning signs or symptoms of a problem and get the water tested and problem diagnosed.

Test – implement an approach to mitigate the problem and test to make sure the problem is corrected.

Source:  Oram, Brian; “Lead In Drinking Water – Is There Lead In My City Drinking Water ?”, Water Research Center / Know Your H20 Program, 2020.

Recommended Reading:

The Poisoned City: Flint’s Water

More on Lead