AquiSense POU POE Treatment System with UV Disinfection Multiple Barriers
AquiSense can help provide families with the purest water available. The PearlAqua harnesses the power of ultraviolet (UV) light to destroy pathogens in the most natural way possible, without adding any harmful chemicals. The PearlAqua has been compactly designed to be a Point-of-Entry (POE) or Point-of-Use (POU) system. Physical filtration of the water is required before UV disinfection so a PearlAqua is a great addition to any existing water treatment system.
The PearlAqua was designed to work with any water treatment system so installation of the unit is easy and retrofitting is simple. Reverse Osmosis (RO) systems remove dissolved inorganic solids from water, but not organic materials or pathogens. This may lead to algae growing in the holding tank, but recirculating the water through a PearlAqua will prevent algae from ever growing. Traditional UV disinfection systems use a large amount of electricity and heat the water while they disinfect. These systems also use mercury gas-filled lamps to create their UV light. Mercury lamps are very fragile and release mercury into the water stream when they break.
The LEDs inside the PearlAqua last for 10,000 hours. A mercury lamp will have a similar lifespan, but a mercury lamp can only be turned off/on a few times per day. This limitation leads to the lamp remaining on, even when there is no water flow – hence annual replacement. The PearlAqua LED system can be turned on/off an infinite number of times per day, so the unit only runs when water is flowing through it, greatly extending the lamp replacement interval. For example, a PearlAqua unit that is on for 2 hours a day will only need a lamp replacement every 14 years!
The Units provide “The Home Concept“
1 .DC input power means solar power is possible
2. After hot water tank as pathogen barrier
3. Point of use legionella control
4. Disinfect rain water after storage
5. Post septic tank for environmental protection
6. Reuse grey water without concern of infection
7. RO/filter system final polishing and/or bio-film control
For more news and information – Go to News Page
A few steps
Step 1 – Get your water tested.
Step 2 – Get the water properly treated.