New Report – Violations NJ Utilities Drinking Water Testing

Sharing an interesting article:

Violations At NJ Utilities Enumerated In New Report
By Sara Jerome, @sarmje

“A new analysis of New Jersey drinking water reveals widespread challenges.“More than 1.5 million New Jerseyans are served by a utility that has been cited for excessive contaminants since April 2014, when the Flint water crisis was revealed, according to an analysis of U.S. EPA data by USA TODAY NETWORK New Jersey,” The Asbury Park Press reported. “The data shows that water utilities in the Garden State have racked up at least 226 contamination violations of the Safe Drinking Water Act since Flint became synonymous with tainted tap water and put other water systems under a spotlight,” the report continued.  The report shows the state’s water challenges extend even beyond Newark, which is undergoing a major lead crisis.”

Read MORE

What we recommend:

1. Know if you are getting your water from a regulated or unregulated water system.
2. If you are part of a regulated system – Make sure to get a copy of the consumers confidence report for your supplier.
3. Inspect your piping and home, could you have a lead issue in your home?  This includes lead piping, lead solder, lead paint, lead dust, or consumer products high in lead.
4. Conduct a lead screening test on your home drinking water.
5. If necessary, conduct a first flush and flush test of your drinking water for lead and check to see if your water is vulnerable to corrosion.
6. Need help diagnosing a problem – Go to Know Your H20.
7. Get our educational booklet on drinking water.
8. Consider a point of use filtration system that reduces lead.

Water Filtration System

Custom Point of Use Systems
Crystal Quest Systems (Point of Use, Whole House Systems,  Air and Water Disinfection)
Filter Water Systems (Point of Use and Whole House Systems)
US Water Systems (“Forever Chemicals,, UV Disinfection, Iron, Manganese”)

Blog Post on Drinking Water and Real Estate

Newark Drinking Water Lead Corrosion Awareness and Testing Needed

Interesting article – “Newark said its water was safe, but email reveals it was warned of problems months ago”.

“City officials in Newark said they learned in October that lead water contamination wasn’t just affecting a dozen homes, but was a “widespread problem,” potentially impacting as many as 40,000 residents. But, a newly-released email shows officials were warned at least seven months earlier — months they spent insisting the water was “absolutely safe to drink,” and assuring residents that the issue was confined to a small number of homes.

Beginning in April of this year, through messages on its website and in public statements, the city blamed old infrastructure for elevated lead levels in tap water samples. New court records in an ongoing federal lawsuit over the city’s lead problem, however, show a consultant pointed to another cause: Newark’s water treatment at one of its plants no longer appeared to work — an early sign that the issue could be widespread.

CDM Smith, the consultant hired by Newark to study how the city was treating its water, submitted its draft report in October but shared its initial findings with three officials as early as February, records show.

In a Feb. 22 email to the city’s top water department officials — including then-director Andrea Hall Adebowale and then-deputy director Kareem Adeem — the consultant said a preliminary review showed Newark’s method of preventing lead from corroding off old plumbing and dissolving into the distribution system “has not been effective.””

Read More

Our Take

  1. Identifing and fixing system wide water distribution problems related to corrsion is not fast or easy.
  2. Part of the problem may be your own household plumbing, fixtures, and service lines – have a plumber check your piping.
  3. In my opinion, it is the user that will first notice a problem.  These problems could be identified as a blue-green coating of aerators, blue green water, a metallic taste, and in the extreme corrosion and leaky pipes.
  4. Check your home for lead paint and dust hazards.
  5. We strongly recommend all water users to due the following:
    1. Order and have some easy to use self water testing kits.
    2. Consider using a point-of-use drinking water filter to polish your water.
    3. Know Your H20 – Get your water check by a laboratory at least annually.

Recommending Reading and More.

[amazon_link asins=’B005CKIM8K,B073713G5F’ template=’ProductCarousel’ store=’webdespro-20′ marketplace=’US’ link_id=’9a8bed01-0302-11e9-8de1-b58977caa19f’]

Recommending Household Testing

[amazon_link asins=’B0091GUNYM’ template=’ProductCarousel’ store=’webdespro-20′ marketplace=’US’ link_id=’cee2aaba-0302-11e9-b811-19c6fbcd846c’]